AQUALINE PLUMBING, ELECTRICAL & AIR CONDITIONING LLC

aqualine plumbing electrical and air conditioning Fountain Hills

CALL US TODAY ON:

(480) 498-2288

Location:

Fountain Hills, AZ

Common Electrical Hazards And The Ways To Handle Them

9/16/2018

Electrical safety is something that should not be taken lightly. The best way to avoid the electrical hazard is by learning about it. Some of the most common electrical hazards are given below along with the ways to handle them:

  • Old wiring- Faulty wiring is one of the leading causes of the house fires. You should call an experienced electrician like Electrician Fountain Hills once in every few years to check the condition of the wiring in your home. The most obvious sign of the damaged wiring is flickering light. When the light of your home flickers for no any apparent reason, it means that the fault is with your wires. It’s a sign that you should call an electrician to fix the issue as early as possible.
  • Overloaded circuits- Your outlets are designed to handle only the certain amount of load and if it increases beyond its capacity, it can cause an electrical fire. Using power strips, extension cords or adapter is a most common practice when you don’t have sufficient numbers of outlets to fulfill your need. It results in overloading the circuits. When the circuit overloads it causes the breaker to trip. If your breaker is tripping frequently, it's a sign to remove a few devices from the outlets.
  • Overused extension cord- Extension cords are used to plug in many devices in an outlet. But remember that they are only for the temporary use, if used for the prolonged duration it can overload the circuit causing the risk of house fires. Another bad effect of using an extension cord is that you or anyone else in your home can trip due to the cord which can break the cord and can cause fire hazards. If you need a few more outlets in your home get them installed rather than resorting to the method of using the extension cords.
Electrician Fountain Hills

  • Water – The areas which are near the water like swimming pool, kitchen and bathroom need special kind of outlets so as to prevent the shock. These special types of outlets are called as GFCI (ground fault circuit interrupter). They shut down the power after detecting the water nearby. Thus they reduce the risk of shock and electrocution. It should always be kept in mind that water and electricity should not come into contact. If an appliance is plugged in and it gets wet, don’t try to unplug it without shutting off the power.
  • High wattage bulb- Installing a high watt bulb in a socket which is meant to accommodate the low wattage bulb, can overload the wiring of the socket. Use the bulb which the socket can accommodate to avoid any electrical complications.
  • Child protection – If you have children in your home, it’s important to make your home safe for your children. They should not put their fingers, pins, pen in the outlets. To protect the children from any risk, the outlets with the child safety plates are installed in the home. When the outlets are not in use the plate automatically snaps in its place.
  • Smoke alarms- A working smoke alarms are very necessary to prevent the electrical hazards. It becomes important to check your smoke alarm every month. Change the batteries if you found them dead. You should change the batteries of the smoke alarm every six months.
  • Damaged cords- If any of your appliances have a broken or damaged cord, refrain from using the appliance. The damaged wires can cause shocks, burns, and fires. To prevent the cord from getting damaged, you should always pull the plug from the plastic handle. Yanking the cord from the outlet is going to damage the cord.
  • 5 Reasons Your AC Is Dripping Out Water

    8/28/2018

    Are you thinking why your AC is leaking water?
    Air conditioners are more than a straightforward household appliance, it’s something that lots of us couldn’t suppose living life without. This is particularly true in the mid of the summer, when weather can become quite hot and you suddenly find that you’re spending as much of time indoor as you can possibly.

    Having an AC that is frequently operational during this time could be of advantage, but there also are a few issues that might take place too. One among those problems is when your air conditioner is dripping water.

    As it’s such a common issue to have water dripping from an AC unit, it’s the aim of this blog to recognize the reasons why they happen and to provide some solutions which can get the unit up and operational back again.

    Air Leak from Vents
    One among the more popular reasons why water might be dripping from Air Conditioner is because there’s an air leakage from somewhere around area of the vents. This is a quite common issue and it’s fairly simple to diagnose and fix. Simply, you have to inspect the system carefully to see whether there is some air coming from any place other than grates themselves. If this is the case, then you can buy something to seal out the leakages and the issue must be solved.

    Filter is Blocking
    Next reason why you might be facing dripping water from your air conditioner unit is due to the air filter. Air filter isn’t necessarily making it to drip however if filter is dirty, then it isn’t getting the right airflow and AC unit might be freezing to a certain level. When the AC shuts down, either as it’s turned off or as your room has reached desired temperature, frost melts from air conditioner and the dripping starts. This also is a simple issue both to diagnose and to fix. Check out the air filters on periodic basis and ensure that it’s clean. After replacing or cleaning the filter, the issue should stop.

    AC Repair Fountain Hills

    Leak in The Refrigerant
    It’s a more serious issue and is one that needs the help of an expert like AC Repair Fountain Hills. When a refrigerant leakage exists, vents are probably to leak water. The reason why it’s the case is the AC unit needs sufficient refrigerant levels in order that humidity could be removed from inside of the house. When the water tends to be removed from the house and it remains on the coil, then it could freeze and eventually, result in dripping. Contact an expert if this is the problem.

    Condensation Line is Blocked
    There’s a drain line which enables water which has collected to flow from an area without dripping in the house. If you look in the condenser system and drip pan is filled with water and overflowing, it is likely the issue. If you see rust in the region, it is a very serious issue potentially. You should unclog the drains to allow water to flow from the area.

    A Frozen AC Coil
    There might be times when evaporator coil can freeze over and it makes the whole system to shut off. When the ice will melt, it will eventually lead to an issue with dripping water. It’s a problem that must be assessed as well as corrected by a professional AC technician.

    They are the most popular reasons why water might be dripping from your air conditioner. If you’re able to recognize the problem, you can frequently correct it or know the steps needed to have it fixed for you.

    How To Clean Your Shower Tiles Grout?

    8/24/2018

    TV ads make cleaning your house look so simple, don’t they? Simply spritz on this magical formula, and in a few seconds your bathroom will be sparkling clean!

    One of the most difficult things to clean out in your bathroom is tiles—mainly, the grout between the tiles. Grout stains are quite easy and it is porous, means it is simple for dirt and many other gunk to easily get trapped deep inside.

    In a humid, warm environment, grout can become a great harbour for bacteria and mold. Good thing the showers are humid and warm environments!

    Cleaning bathroom tiles, mainly those in shower, is vital so that you can avoid health problems linked with mold growth and biofilm.

    To avoid big issues with tiles grout call Plumber Fountain Hills. Below are some ways to keep your shower tiles neat and clean:

    Preventing all shower tile problems

    Of course, you will always need to clean the tiles—there is no way out there to get around it. But there are a few preventative measures which can make the work simpler for you.

    • Ventilate. After shower, ensure to run the bathroom’s fan, and open your bathroom door. Mold thrives in humid environment, so make sure to let the bathroom air out.
    • Seal grout. You will want to seal grout so as to block debris and mildew from penetrating in the surface. The grout sealers can easily be found at home improvement shops, and are accessible in roll-on and spray varieties. Ensure to follow package instructions cautiously.
    • Wipe your tiles. Get in the habits of wiping your tiles down after every shower, with a squeegee or a towel. Removing excess water from surface of tiles will prevent some of it at least from soaking in the grout.

    Plumber Fountain Hills

    Utilizing commercial cleaning product for grout
    There is no shortage of commercial products intended to clean the shower. Just ensure that cleaners are made for grout only and don’t contain acids like citric acid or vinegar. These can eat at grout and also cause more issues than you began with!

    Also be alert that because something is sold out in any supermarket does not mean that it cannot cause issues. Commercially available products release irritating fumes often that might cause respiratory problems or headaches for you. Be sure that the bathroom is ventilated well while you clean it, or try any natural cleaner.

    Using DIY natural cleaner for grout
    There actually are several benefits to using the natural cleaning solutions like they are better for health as they do not include mystery chemical, they can assist protect environment, and in maximum cases they are cheaper than the commercial products.

    In most of the cases you will want to get nylon-bristled scrubbing brushes. Get ready to put on some elbow grease so as to get the grout looking like a new one!

    Here are a few natural grout cleaning options:

    • Hot water and good scrubbing: At times, this is the most excellent way to get a few stains up. Utilize a nylon brush and possibly a bit of dishwashing soap if required.
    • Water and baking soda: Add sufficient water to soda to make paste. Apply to tough stains particularly and let it sit overnight, rinse using hot water.
    • Oxygenated bleach: It’s non-toxic bleach accessible in lots of stores. Mix it with water as per package directions and then scrub on the grout. After 5 minutes, scrub off and rinse using hot water.
    • Hydrogen peroxide and Baking soda: Blend ¼ cup of hydrogen peroxide and ¾ cup of baking soda, and add squirt of dishwashing soap. Use a nylon brush to quickly scrub the solution on the grout. After some minutes, rinse off using hot water.

    How To Prevent Winter Pipe Damages?

    8/6/2018

    Prevent winter pipe damages when you are away this winter season! With holiday season approaching now, families will be surely traveling across the world to spend holidays with their dear ones. If you are also traveling this year, then you probably have gone through many security measures to guarantee the well-being and safety of your house while you’re away. Security systems in place-check. The backup generator if your house loses power-check. Carbon monoxide and Smoke detectors are working appropriately, and neighbors on watch out for anything wary. What could you be missing possibly?

    Like rest of your house, your pipes must be considered and protected both when you are away from your house for any extended time period. Damages from freezing temperatures, corrosion, or blockages can cause your whole piping system to fail or malfunction. Pipe damages can cause huge problems in the house, especially if it happens while you are away and it simply goes unnoticed—until any toilet overflows or pipe bursts. To avoid coming back home to costly flood damage or repairs and to extend longevity of your systems, there are some methods to protect the pipes when you are traveling.

    Prevent Outdoor Damages
    The pipes lead inside and outside your home, so suitable preventative steps must be performed in every area. Below are some things to do outdoors that can guarantee the wellbeing of drain and sewer systems:

    • All the outdoor hoses must be disconnected; as stagnant water lying in a hose potentially can freeze into the pipe back itself. Freezing pipes tends to be at risks of bursting, and that not just damages your pipes however can cause water damages or mold in flooding areas.
    • Tree and shrubbery must be maintained, particularly if you wish to be traveling out for a long time. Roots are one among the key causes of pipe damages; it can easily wrap around the pipes and can break through and even grow into them. So, landscaping should be put above utility pipes.​

    Plumber Fountain Hills

    • Gutter drainages should be managed as well; if heavy snow or rain occurs while you are away and the gutters are draining in one particular spot, freezing or flooding can take place.

    Prevent Indoor Damages
    Indoor prevention of the pipe damages is of the most importance thing as it can lead to most damages. If a break or blockage occurs inside your home, damages can be dangerous, and repairs can be expensive. Garage or basements temperatures can drop lower than outdoors. Below are the steps you could take to avoid pipe damages inside your house:

    • Know the location of shut off valve. If it’s probable to shut off the main water supply when you’re away, it’s good to do this. If not, you could shut off valve to most common appliances or areas in your house.
    • Pipes could be insulated to avoid bursting. This is mainly beneficial for those situated in cooler areas such as a garage, crawlspace or basement. Because you will probably leave heat on at lower temperature when you’re away, these areas will even be at more risk to freezing temperature.
    • Check the supply lines prior to you leave. They could grow brittle with their age, or leaky because of wear and tear. In case there are any sign of damages, they should be immediately replaced.
    • If you’ve a sump pump, then it must be checked prior to you go. You can test the one at your home by filling its pit with water as well as making sure it is working as it must to pump it outside. Ensure that its cord and plug are in great shape, and the breaker is working properly as well,if not then reach Plumber Fountain Hills soon.

Contact Us:

*

Indicates required field

Submit